# Acacia laser settings for xTool F1

Verified laser settings to engrave Acacia (wood - acacia) on the xTool F1, a 10W Diode laser. Engrave: 150 mm/s, 100% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/acacia-settings-xtool-f1-2b72a961-9ee1-45a7-80f8-83e2a4dab930
- Shared by: MakerFlo
- Status: Verified by The Laser Workshop
- Material category: Wood - Acacia
- Machine: xTool F1 (10W Diode laser)
- Last updated: 2026-02-18

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 150 mm/s |
| Power max | 100% |
| Density | 300 LPCM |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [MakerFlo materials and settings](https://thelaserworkshop.com/supplier/makerflo)
- [Black Mark settings](https://thelaserworkshop.com/community/material/712c2cbe-bd28-43ab-ba4b-a970d2adb2ba.md)