# Matte/Gloss Acrylic (Solid Colors) laser settings for OMTech Polar

Community-shared laser settings to cut, score and engrave Matte/Gloss Acrylic (Solid Colors) (acrylic) on the OMTech Polar, a CO2 laser. Cut: 10 mm/s, 55% power, 1 pass. Score: 220 mm/s, 20% power, 1 pass. Engrave: 200 mm/s, 25% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/matte-gloss-acrylic-solid-colors-settings-omtech-polar-39051a82-a805-4645-8bac-e0b8f6297883
- Shared by: simplyshawdesigns
- Status: Community-submitted, not independently verified
- Material category: Acrylic
- Machine: OMTech Polar (CO2 laser)
- Last updated: 2026-02-20

## Cut settings

| Setting | Value |
| --- | --- |
| Speed | 10 mm/s |
| Power | 55% |
| Passes | 1 |

## Score settings

| Setting | Value |
| --- | --- |
| Speed | 220 mm/s |
| Power | 20% |
| Passes | 1 |

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 200 mm/s |
| Power max | 25% |
| Power min | 25% |
| Density | 355 LPI |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All OMTech settings](https://thelaserworkshop.com/brand/omtech)
- [Custom Made Better materials and settings](https://thelaserworkshop.com/supplier/custom-made-better)