# Acacia laser settings for Aeon Laser MIRA 7 Pro S Redline

Verified laser settings to engrave Acacia (wood - acacia) on the Aeon Laser MIRA 7 Pro S Redline, a 60W CO2 laser. Engrave: 300 mm/s, 45% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/acacia-settings-aeon-laser-mira-7-pro-s-redline-3c93f255-572c-4fa7-bf4f-c2c9967763cf
- Shared by: MakerFlo
- Status: Verified by The Laser Workshop
- Material category: Wood - Acacia
- Machine: Aeon Laser MIRA 7 Pro S Redline (60W CO2 laser)
- Last updated: 2026-02-15

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 300 mm/s |
| Power max | 45% |
| Density | 508 LPI |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All Aeon Laser settings](https://thelaserworkshop.com/brand/aeon-laser)
- [MakerFlo materials and settings](https://thelaserworkshop.com/supplier/makerflo)