# 1/8” MDF laser settings for Glowforge Pro

Community-shared laser settings to cut 1/8” MDF (other) on the Glowforge Pro, a 45W CO2 laser. Cut: 170 mm/s, 0% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/1-8-mdf-settings-glowforge-pro-548967d7-b208-44d3-aba4-6382c865e638
- Shared by: llee
- Status: Community-submitted, not independently verified
- Material category: Other
- Machine: Glowforge Pro (45W CO2 laser)
- Last updated: 2026-02-18

## Cut settings

| Setting | Value |
| --- | --- |
| Speed | 170 mm/s |
| Power | 0% |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All Glowforge settings](https://thelaserworkshop.com/brand/glowforge)