# Laserette - Metallic Silver laser settings for xTool F1

Community-shared laser settings to engrave Laserette - Metallic Silver (leather) on the xTool F1, a 10W Diode laser. Engrave: 200 mm/s, 65% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/laserette-metallic-silver-settings-xtool-f1-54f4df38-97ce-4a2d-bfcf-80920cca5bf7
- Shared by: createdworkshop
- Status: Community-submitted, not independently verified
- Material category: Leather
- Machine: xTool F1 (10W Diode laser)
- Last updated: 2026-03-24

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 200 mm/s |
| Power max | 65% |
| Density | 120 LPCM |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [MakerFlo materials and settings](https://thelaserworkshop.com/supplier/makerflo)
- [Laserette - Black to Silver settings](https://thelaserworkshop.com/community/material/8ae4ecbe-329e-4e11-a755-007617b3c226.md)
- [Laserette - White settings](https://thelaserworkshop.com/community/material/c62909b9-20dd-4c91-965a-8a93c5343bc4.md)
- [Laserette - Rawhide settings](https://thelaserworkshop.com/community/material/10391d0c-bdfd-4c90-9124-b3536a2b837a.md)
- [Laserette - Brown settings](https://thelaserworkshop.com/community/material/b604b94a-ed49-49e1-9adb-c1ae3aad2f8a.md)
- [Laserette - Gray settings](https://thelaserworkshop.com/community/material/7dca941b-ceac-4fff-907e-dd0007a77664.md)
- [Laserette - Navy settings](https://thelaserworkshop.com/community/material/5bd40ced-fdc2-4fcd-8f75-8aaf3e97fede.md)