# Acacia Cutting Board with Drip Ring and Corner Hole laser settings for xTool S1

Community-shared laser settings to engrave Acacia Cutting Board with Drip Ring and Corner Hole (wood) on the xTool S1, a 40W Diode laser. Engrave: 210 mm/s, 25% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/acacia-cutting-board-with-drip-ring-and-corner-hole-settings-xtool-s1-8ea9470e-7c27-4752-ace8-60d0000b07f1
- Shared by: mountainviewcrafters
- Status: Community-submitted, not independently verified
- Material category: Wood
- Thickness: 12.7 mm
- Machine: xTool S1 (40W Diode laser)
- Last updated: 2026-02-24

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 210 mm/s |
| Power max | 25% |
| Power min | 25% |
| Density | 86.61 LPCM |
| Passes | 1 |

## Notes from the author

xtool Studio - Engraved with 40 watt laser

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [JDS Industries materials and settings](https://thelaserworkshop.com/supplier/jds-industries)
- [Laserette Journal Notebook settings](https://thelaserworkshop.com/community/material/b4500407-2d42-4e29-98cf-e269acbc6891.md)
- [Acacia Paddle Shaped Cutting Board settings](https://thelaserworkshop.com/community/material/9215c6bb-4801-45f2-a6bb-33547de12161.md)
- [Acacia Wood Cutting Board settings](https://thelaserworkshop.com/community/material/87de71a0-4d40-4bc7-acd2-f573105a2f0f.md)
- [Black/Silver Leatherette Journal settings](https://thelaserworkshop.com/community/material/9ba7b7a5-2eca-4ac1-8048-32acee0dd767.md)