# TruFlat laser settings for Aeon Laser MIRA 9

Community-shared laser settings to cut, score and engrave TruFlat (plywood) on the Aeon Laser MIRA 9, a CO2 laser. Cut: 15 mm/s, 75% power, 2 passes. Score: 300 mm/s, 0% power, 1 pass. Engrave: 250 mm/s, 45% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/901a680f-7a18-452e-9f89-41e1e3a152aa
- Shared by: girldadcreative
- Status: Community-submitted, not independently verified
- Material category: Plywood
- Machine: Aeon Laser MIRA 9 (CO2 laser)
- Last updated: 2026-02-06

## Cut settings

| Setting | Value |
| --- | --- |
| Speed | 15 mm/s |
| Power | 75% |
| Passes | 2 |

## Score settings

| Setting | Value |
| --- | --- |
| Speed | 300 mm/s |
| Power | 0% |
| Passes | 1 |

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 250 mm/s |
| Power max | 45% |
| Power min | 20% |
| Density | 1016 LPI |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All Aeon Laser settings](https://thelaserworkshop.com/brand/aeon-laser)
- [Acrylic Sheet settings](https://thelaserworkshop.com/community/material/7ad0ae3d-fc9d-4809-b10c-f7e117383e42.md)
- [TruFlat settings](https://thelaserworkshop.com/community/material/8ea1a295-14c5-482d-9c3d-5eeedcbfe955.md)