# Bamboo laser settings for xTool F1 Ultra

Community-shared laser settings to engrave Bamboo (wood) on the xTool F1 Ultra, a 20W Diode laser. Engrave: 350 mm/s, 100% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/bamboo-settings-xtool-f1-ultra-96a6dc92-b8dc-47cb-b6f9-f090e9e77c0a
- Shared by: createdworkshop
- Status: Community-submitted, not independently verified
- Material category: Wood
- Machine: xTool F1 Ultra (20W Diode laser)
- Last updated: 2026-03-18

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 350 mm/s |
| Power max | 100% |
| Density | 160 LPCM |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [Szuch Design materials and settings](https://thelaserworkshop.com/supplier/szuch-design)
- [Black Walnut settings](https://thelaserworkshop.com/community/material/bf6f0f95-81a1-4c3d-a7a8-9a4adf6825d0.md)