# Vallet Box laser settings for xTool F1 Ultra

Verified laser settings to engrave Vallet Box (wood) on the xTool F1 Ultra, a 20W Diode laser. Engrave: 380 mm/s, 80% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/vallet-box-settings-xtool-f1-ultra-9a8d2805-9cc0-4d22-a802-53b67a8bd3ae
- Shared by: MakerFlo
- Status: Verified by The Laser Workshop
- Material category: Wood
- Machine: xTool F1 Ultra (20W Diode laser)
- Last updated: 2026-02-15

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 380 mm/s |
| Power max | 80% |
| Density | 140 LPCM |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [MakerFlo materials and settings](https://thelaserworkshop.com/supplier/makerflo)