# 1/8-inch White PlyCore laser settings for xTool P3

Community-shared laser settings to cut 1/8-inch White PlyCore (wood) on the xTool P3, an 80W CO2 laser. Cut: 20 mm/s, 85% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/1-8-inch-white-plycore-settings-xtool-p3-aa535ac6-4a7f-40f2-973f-b6df6020ecbc
- Shared by: createdworkshop
- Status: Community-submitted, not independently verified
- Material category: Wood
- Thickness: 3 mm
- Machine: xTool P3 (80W CO2 laser)
- Last updated: 2026-09-05

## Cut settings

| Setting | Value |
| --- | --- |
| Speed | 20 mm/s |
| Power | 85% |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [Black Walnut settings](https://thelaserworkshop.com/community/material/5eb41d35-f922-486c-a08d-273a215706d2.md)
- [Round Glass Ornaments settings](https://thelaserworkshop.com/community/material/3819a4b0-ef38-4f55-bfe6-70cfeb9f682c.md)
- [Small Cutting Board with Handle - Acacia settings](https://thelaserworkshop.com/community/material/1c30be15-6d2d-44ef-b0ae-247a0567e4e4.md)
- [Leatherette Notebooks - Green to Black settings](https://thelaserworkshop.com/community/material/c3ed6ff2-4d20-446b-b110-92e5494cd808.md)
- [Leatherette Passport Holders Red to White settings](https://thelaserworkshop.com/community/material/8f051c8a-9447-429e-bb39-40801c7fc04b.md)
- [Denim Beige/Black Leatherette settings](https://thelaserworkshop.com/community/material/9103e107-b799-4d7d-98d8-46fb19ab9e60.md)