# Wood Pendant Jewelry laser settings for OMTech AF Series (80W)

Verified laser settings to engrave Wood Pendant Jewelry (wood) on the OMTech AF Series (80W), an 80W CO2 laser. Engrave: 200 mm/s, 35% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/wood-pendant-jewelry-settings-omtech-af-series-80w-bb1934fd-f7f7-4beb-aed7-1fd619461a9f
- Shared by: MakerFlo
- Status: Verified by The Laser Workshop
- Material category: Wood
- Machine: OMTech AF Series (80W) (80W CO2 laser)
- Last updated: 2026-02-15

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 200 mm/s |
| Power max | 35% |
| Density | 762 LPI |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All OMTech settings](https://thelaserworkshop.com/brand/omtech)
- [MakerFlo materials and settings](https://thelaserworkshop.com/supplier/makerflo)