# Pocket Knife laser settings for xTool S1

Verified laser settings to engrave Pocket Knife (wood) on the xTool S1, a 40W Diode laser. Engrave: 210 mm/s, 25% power, 1 pass.

- Source page: https://thelaserworkshop.com/community/material/pocket-knife-settings-xtool-s1-e195de3e-6dad-43c9-8898-98fc628cd301
- Shared by: MakerFlo
- Status: Verified by The Laser Workshop
- Material category: Wood
- Machine: xTool S1 (40W Diode laser)
- Last updated: 2026-02-15

## Engrave settings

| Setting | Value |
| --- | --- |
| Speed | 210 mm/s |
| Power max | 25% |
| Density | 210 LPCM |
| Passes | 1 |

## Before you run this job

Settings vary between individual machines, even of the same model. Run a test card on scrap material first, never leave the laser unattended, and never cut PVC or vinyl.

## Related settings

- [All xTool settings](https://thelaserworkshop.com/brand/xtool)
- [MakerFlo materials and settings](https://thelaserworkshop.com/supplier/makerflo)