xTool F1 Laser Settings
14 settings tested on the xTool F1, a 10W Diode and 2W IR laser, covering leather, metal and wood. 2 are verified by The Laser Workshop or the manufacturer. Select a material for its full settings, notes, and photos.
xTool F1 engraving settings
| Material | Speed | Power | Density | Passes |
|---|---|---|---|---|
| AcaciaWood - Acacia | 150 mm/s | 100% | 300 LPCM | 1 |
| Black MarkMetal - Silver | 2 mm/s | 100% | 300 LPCM | 1 |
| Black WalnutWood | 200 mm/s | 100% | 160 LPCM | 1 |
| Laserette - Black to SilverLeather | 900 mm/s | 90% | 160 LPCM | 1 |
| Laserette - BrownLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - GrayLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - HolographicLeather | 200 mm/s | 65% | 120 LPCM | 2 |
| Laserette - Metallic GoldLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - Metallic SilverLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - NavyLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - RawhideLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - SageLeather | 200 mm/s | 65% | 120 LPCM | 1 |
| Laserette - WhiteLeather | 200 mm/s | 65% | 120 LPCM | 2 |
| Monarch Pine Silver Engrave - SilverMetal | 5 mm/s | 100% | 300 LPCM | 1 |
Before you run these settings
Settings vary between individual machines, even of the same model: lens, focus, alignment, air assist, and the exact material all change the result. Run a small test grid on scrap from the same sheet first, never leave the laser unattended, and never cut PVC or vinyl.
Settings for other lasers
Have a setting that works on your xTool F1? Create a free account to save it and share it with the community.