xTool S1 Laser Settings
6 settings tested on the xTool S1, a 40W Diode laser, covering wood and leather. 1 is verified by The Laser Workshop or the manufacturer. Select a material for its full settings, notes, and photos.
xTool S1 engraving settings
| Material | Thickness | Speed | Power | Density | Passes |
|---|---|---|---|---|---|
| Acacia Cutting Board with Drip Ring and Corner HoleWood | 12.7 mm | 210 mm/s | 25% | 86.61 LPCM | 1 |
| Acacia Paddle Shaped Cutting BoardWood | 12.7 mm | 210 mm/s | 25% | 86.61 LPCM | 1 |
| Acacia Wood Cutting BoardWood | 12.7 mm | 210 mm/s | 25% | 0.05 LPCM | 1 |
| Black/Silver Leatherette JournalLeather | 19.05 mm | 290 mm/s | 10% | 0.08 LPCM | 1 |
| Laserette Journal NotebookLeather | — | 400 mm/s | 20% | 55.12 LPCM | 1 |
| Pocket KnifeWood | — | 210 mm/s | 25% | 210 LPCM | 1 |
Before you run these settings
Settings vary between individual machines, even of the same model: lens, focus, alignment, air assist, and the exact material all change the result. Run a small test grid on scrap from the same sheet first, never leave the laser unattended, and never cut PVC or vinyl.
Settings for other lasers
Have a setting that works on your xTool S1? Create a free account to save it and share it with the community.