xTool F1 Ultra Laser Settings
3 settings tested on the xTool F1 Ultra, a 20W Diode laser, covering wood. 1 is verified by The Laser Workshop or the manufacturer. Select a material for its full settings, notes, and photos.
xTool F1 Ultra engraving settings
| Material | Speed | Power | Density | Passes |
|---|---|---|---|---|
| BambooWood | 350 mm/s | 100% | 160 LPCM | 1 |
| Black WalnutWood | 400 mm/s | 100% | 160 LPCM | 1 |
| Vallet BoxWood | 380 mm/s | 80% | 140 LPCM | 1 |
Before you run these settings
Settings vary between individual machines, even of the same model: lens, focus, alignment, air assist, and the exact material all change the result. Run a small test grid on scrap from the same sheet first, never leave the laser unattended, and never cut PVC or vinyl.
Settings for other lasers
Have a setting that works on your xTool F1 Ultra? Create a free account to save it and share it with the community.