Glowforge Pro Laser Settings
1 setting tested on the Glowforge Pro, a 45W CO2 laser, covering other. Select a material for its full settings, notes, and photos.
Glowforge Pro cutting settings
| Material | Speed | Power | Passes |
|---|---|---|---|
| 1/8” MDFOther | 170 mm/s | 0% | 1 |
Before you run these settings
Settings vary between individual machines, even of the same model: lens, focus, alignment, air assist, and the exact material all change the result. Run a small test grid on scrap from the same sheet first, never leave the laser unattended, and never cut PVC or vinyl.
Settings for other lasers
Have a setting that works on your Glowforge Pro? Create a free account to save it and share it with the community.