OMTech AF Series (80W) Laser Settings
1 setting tested on the OMTech AF Series (80W), an 80W CO2 laser, covering wood. 1 is verified by The Laser Workshop or the manufacturer. Select a material for its full settings, notes, and photos.
OMTech AF Series (80W) engraving settings
| Material | Speed | Power | Density | Passes |
|---|---|---|---|---|
| Wood Pendant JewelryWood | 200 mm/s | 35% | 762 LPI | 1 |
Before you run these settings
Settings vary between individual machines, even of the same model: lens, focus, alignment, air assist, and the exact material all change the result. Run a small test grid on scrap from the same sheet first, never leave the laser unattended, and never cut PVC or vinyl.
Settings for other lasers
Have a setting that works on your OMTech AF Series (80W)? Create a free account to save it and share it with the community.