Skip to main content

About this project

Category
Jewelry
Difficulty
Intermediate
Time
5 min
Materials
Metal

Created Workshop is still writing up this project. The photos and settings are ready to use.

Laser profiles

Settings that worked for other makers, by machine and material. Always run a test first.

  • xTool F1

    2 W · Diode laser

    Metal

    From Created Workshop

    Engrave

    Speed
    5 mm/s
    Power
    100%
    Passes
    1
    Density
    300 LPCM
    Not sure? Run a test first.

  • xTool F1 Ultra

    20 W · Fiber laser

    Metal

    From Created Workshop

    Engrave

    Speed
    100 mm/s
    Power
    0–100%
    Density
    300 LPCM
    Not sure? Run a test first.

Makes

Be the first to make this

Made your own version? Tap Made it at the top of the page and share a photo and the settings you used.

Comments

Be kind and helpful. Comments are shown right away and can be reported.

No comments yet. Have a question or a tip? Start the conversation.